As I was driving down the street this morning I caught sight of a car that had some serious sagging issues. Next to it was another car that had purposely lowered their car so it could be a “cool low-rider”. Both of these cars needed some serious improvements with their car height.

Sometimes adjustments in height of the car can be done purposely, and sometimes it is a gradual process due to sagging springs. When you have issues with the height of your car you can eventually have issues with the rest of the car. This may surprise a lot of people, but it is true.

Manufacturers design their suspension control arms to work at a specific height. When the height is different, then the suspension arms aren’t operating at their normal range. When the car height is lower than that original height then the arms are forced to work at a different range level, which can effect your steering and other parts of your car and make it necessary to take the car in for some Utah auto repair work.

Ride height also affects other cars. When your ride is too high or too low the headlights are not at the same level as the other cars. When your car is higher than other vehicles you can easily blind oncoming vehicles, or if it is too low then other drivers won’t see you as easily.

If you didn’t intentionally change your car height there are some ways to measure to see if you have any sagging springs or something that is making your car naturally lower. There are specific places on your car where you want to look at for. You can usually find what the correct measurements should be from your car manual, but you can also compare measurements of the front of the car to the back of the car to see if there are any differences.

At the front of the car you would want to measure a specified part of the bumper to the ground. This should meet a certain height, depending on the vehicle. You should also do the same for the back of the car.

Another part to measure is where the wheel fenders are. Find the fender tip and measure from the ground up to the fender tip and see what that height is. You will do this for all four wheels of your vehicle.

Finally, you want to check out the middle of your car to see what its height is. Measure from the rocker sill to the ground to see what the height level is here too. If there are differences in height level and your car is constantly having issues with bottoming out or nose diving while you are breaking, it is a good indicator that you need Utah auto repair work done. Utah auto repair mechanics should easily be able to repair any weak or sagging springs that may be affecting your car.

Categories: Auto Repair

Recent Posts

Related Posts

  • electric vehicle battery component in layers

    As an EV owner, understanding your vehicle's battery is critical. From its capacity to its lifespan, and everything in between, we'll guide you through what you need to know to optimize your EV experience. So buckle up and get ready - we're about to shed some light on the electrifying world of EV batteries. What [...]

  • woman looking at her smoking engine on side of road

    If your car is running hot, it can be a sign that something’s not right with your engine. Fortunately, diagnosing the cause of an overheating engine isn't too difficult if you know what to look for and how to address it. Keep reading if you want to learn the most common issues that occur when [...]

  • red car exhaust smoking on street

    Your vehicle's exhaust system serves a critical role in managing the byproducts of the combustion process and ensuring optimal engine performance. The appearance of colored smoke from the exhaust pipe, either when stationary or accelerating, can provide valuable clues to underlying mechanical issues. What is a car exhaust? A car exhaust is a system [...]