Clay bars are used to remove embedded dirt and debris from auto paint. Even after washings, finite particles of dust are left working their way into your car’s paint job. So, learning how to use clay bar could be a great investment for a car you really want to keep looking nice. Additionally, wheels, glass, and light covers can be buffed with the clay bar to remove surface layer debris.

Clay bar is not something you want to use every week on your paint, or even every few months, as it can wear down the paint over time. But twice a year is a reasonable frequency for using clay bar, when followed by fresh paint or a good polish job.

Before using the clay bar, make sure the car is thoroughly washed. If you have granules of dirt left when you use the clay bar, you could end up scratching your paint. To use the clay bar, you will need a clay bar lubricant like a combination of shampoo and water or quick detailers. And select a clay bar that is a fine grade, for most jobs, as a medium grade will usually require a paint job or polishing as a finish.

The best quick detailers to use are those that clean well but do not offer protection. This makes them more effective at removing the incrusted dirt from the paint. Of course you can add protection afterwards, when you polish and shine. A couple examples of good quick detailers are Poorboy’s Spray and Wipe and Optimum No Rinse (diluted with water).

After washing and drying your vehicle carefully, be sure to start with a small broken-off piece of clay and shape it into a flat shape. Spray your lubricant over a 1.5’ x 1.5’ area and begin claying. You should use gentle, overlapping strokes and a lot of patience. Once the contamination has lifted, when the clay slides without resistance across the paint, you can wipe off the clay lube with a microfiber towel. Repeat this process for the entirety of your car or the whole space of contamination, if you are doing spot work.

Each time you start a new 1.5’ x 1.5’ area, you should reshape your clay bar to expose a fresh flat surface. You don’t want to get a buildup of contamination in the clay that you’re running across the surface of your paint, so use clean pieces as necessary. Once you are finished, make sure you give your car another good washing and, preferably, an application of protective coating for the paint.

Categories: Uncategorized

Recent Posts

Related Posts

  • electric vehicle battery component in layers

    As an EV owner, understanding your vehicle's battery is critical. From its capacity to its lifespan, and everything in between, we'll guide you through what you need to know to optimize your EV experience. So buckle up and get ready - we're about to shed some light on the electrifying world of EV batteries. What [...]

  • woman looking at her smoking engine on side of road

    If your car is running hot, it can be a sign that something’s not right with your engine. Fortunately, diagnosing the cause of an overheating engine isn't too difficult if you know what to look for and how to address it. Keep reading if you want to learn the most common issues that occur when [...]

  • red car exhaust smoking on street

    Your vehicle's exhaust system serves a critical role in managing the byproducts of the combustion process and ensuring optimal engine performance. The appearance of colored smoke from the exhaust pipe, either when stationary or accelerating, can provide valuable clues to underlying mechanical issues. What is a car exhaust? A car exhaust is a system [...]